Call Today

 

 

In this article below you can find additional high-quality answers pertaining to What Would Cause My Electric Water Heater to Stop Working?.

Lots of modern-day residences make use of an electric water heater for their heating unit, due to its convenience and also ease of use. Nevertheless, much like any other electric devices, troubles might arise with its usage, unexpectedly. It can be truly discouraging to get up to a cool shower as opposed to a warm one or having your bath with water that isn't hot enough and even as well warm. Whatever the situation might be, hot water heater troubles can be fairly nerve-racking. Fortunately, we've made a list of possible services to your water heater problems. There are a variety of aspects that can create most of these troubles, maybe an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for safety and security. Whatever the trouble is, getting it fixed need to not posture way too much of a concern if you adhere to these actions:

 

Examine Your Power Supply:

As fundamental as this might appear, it is extremely required. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water instantly retires is to confirm that it isn't a power problem. Check if the fuse is blown out or the breaker tripped. If the circuit breaker is the concern, just turn it on and off once more. Replace any busted or worn-out fuse. Test the device with power after these modifications to see if it's now functioning.

 

Inspect the Heating Element in the Hot Water Heater:

If it's not a power issue, then attempt having a look at your heating element if it is still functioning. Evaluate each of your burner to make sure the problem isn't with any one of them. If any of them is damaged, replace that component and after that check whether the warm water is back on.

 

Check Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't hot sufficient, you may need to inspect the temperature setups on your upper thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the access panel and also press the red button for temperature level reset above the thermostat. This need to help heat the water. Turn the breaker back on as well as inspect if the trouble has been dealt with.

 

Call A Specialist:

If after replacing all defective components and resetting your temperature level, the hot water heater still isn't working, you may require to speak to a specialist plumber for a specialist point of view. The trouble with your heating system could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water required in your home. Whatever the case may be, an expert plumber would certainly aid solve the issue.

 

Final thought

Hot water heater troubles are not always major. A number of them result from small concerns like a blown fuse or damaged heating element. Changing the damaged components should work. Nonetheless, if you are still incapable to solve the issue, give a call to your local plumber to come to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I was made aware of that report on How to Troubleshoot and Repair an Electric Water Heater from someone on another web property. Do you know about another person who is very much interested in the subject? Do not hesitate to promote it. Bless you for your time. Don't hesitate to check our blog back soon.

Check It Out